•
Save the configuration using [F9]: Save Configuration on the Menu
screen.
Figure 7-53 Saving of the Configuration Information
Case2: When performing Synchronization by NTP Server that is set Server 1
to 2.
•
Time adjustment with the NTP server set to NTP Server 1 or NTP Server 2
Shut down All guest OSs.
•
Place the cursor on LPAR RTC on the Date and Time screen and press
[Enter] to display a sub-screen. Select "LPAR SEL Time" and press
[Enter].
•
Place the cursor on Time Zone on the Date and Time screen and press
[Enter] to display a sub-screen. Set a "Time Zone" and press [Enter].
Operation by LPAR manager Screen
Hitachi Compute Blade 500 Series Logical partitioning manager User's Guide
Figure 7-52 Adjusting Time of LPAR
Figure 7-54 Selecting the LPAR SELTime
7-91