Hitachi Compute Blade 500 Series User Manual page 303

No. Item
(2) LP Auto Specifies whether or not shut down the
Shutdown LPAR manager system if all LPARs have
become deactivated.
Yes: Shuts down the LPAR manager
system.
No: Does not shutdown the LPAR
manager system.
When turning off the power of the
system with UPS, set LP Auto Shutdown
to "Yes".
When LPAR migration is performed, LP
Auto Shutdown is disabled, the same as
when the value is "No".
(3) Shutdown Displays the LP System Shutdown
State status.
Ready: The LPAR manager system is
running.
InProgress: The LPAR manager system
is shutting down.
When the LPAR manager system is shut
down using the power control schedule
of ServerConductor / Blade Server
Manager, the shutdown state becomes
InProgress when the shutdown time
arrives. In this case, it is possible to
cancel the shutdown then.
(4) LP Sets whether or not to detect the hang-
ErrorWatching up of LPAR manager itself.
Yes: Detects an LPAR manager hang-up.
When detecting an LPAR manager hung-
up, collects an LPAR manager dump
automatically and reboots an LPAR
manager.
No: Does not detect an LPAR manager
hang-up.
(5) PhyCPU C- Sets Power Saving Function.
State (>= C3)
Enable : Enabling Power Saving
Function.
Disable : Disabling Power Saving
Function.
For CB 520H B2 model, Power Saving
Function is not supported. Power saving
effect is not obtained when Power
Saving Function is enabled.
Operation by LPAR manager Screen
Hitachi Compute Blade 500 Series Logical partitioning manager User's Guide
Description
Supported
Default LPAR
Value manager
Version
No 01-0X~
- 01-0X~
Yes 01-0X~
Enable 01-0X~
7-99