Hitachi Compute Blade 500 Series User Manual page 243

No. Item
F: Fibre Channel
U: USB controller
(6) Schd Sets the PCI device's scheduling mode.
D: Assigns to an LPAR in the dedicated
mode.
E: Assigns to an LPAR in the exclusively
shared mode.
S: Assigns to an LPAR in the shared mode.
(7) PCI Device Sets the assignation of the PCI device to
Assignment LPARs.
*: unassigned
A: assigned but not activated
R: activated and attached
-: cannot be assigned
PCI device is set USB automatic attach that
is shown "#" when an assignment status is
"A" or "R".
(8) Selected Displays the information for the PCI device
PCI Device selected with the cursor.
Information
#: Displays the number that LPAR manager
gives each PCI device for identification
purposes.
Vendor: Displays the vendor name (up
to15 characters)
Device Name: The device name (up to 31
characters)
Slot#: Displays the slot number.
Bus#: Displays the bus number of the PCI
configuration space
Dev#: Displays the device number of the
PCI configuration space
Func#: Displays the function number of the
PCI configuration space
(9) Function Displays the function keys that can be used
Key in this screen.
F5: Switches USB device assignment.
F10: Updates the content of any changes
to the Scheduling Mode of a PCI device to
LPAR manager.
F11: Scrolls the page to the right within the
screen.
F12: Scrolls the page to the left within the
screen.
Operation by LPAR manager Screen
Hitachi Compute Blade 500 Series Logical partitioning manager User's Guide
Description
Supported
Default LPAR
Value manager
Version
- 01-0X~
- 01-0X~
- 01-0X~
- 01-0X~
7-39