How to display the PCI Device Mapping Information
PCI Device Mapping Information is displayed by pressing [F2] (MappingInfo)
key on the PCI Device Information screen.
Example screen of PCI Device Mapping information is below.
The following table describes each item on this screen.
No.
(1)
(2)
(3)
(4)
(5)
7-36
Hitachi Compute Blade 500 Series Logical partitioning manager User's Guide
Figure 7-12 PCI Devices Mapping Information Screen
Table 7-13 Details of PCI Devices Mapping Information Screen
Item
LPARxxx[yyy]
Host PciConfig
LPAR PciConfig
Type
Schd
Operation by LPAR manager Screen
Description
Displays LPAR No. and LPAR Name
xxx: LPAR No.
yyy: LPAR Name
Displays physical PCI device information which is
assigned to the LPAR.
Displays PCI config address of physical PCI devices which
are assigned to the LPAR.
Displays the type of physical PCI devices.
U: USB controller
N: Network Interface Card (NIC)
Add "v" to the end of line when using VF NIC.
F: Fibre Channel (FC)
S: SCSI controller or RAID controller
Displays scheduling mode of physical PCI devices.
D: Dedicated mode
S: Shared mode