Check The Lpar Manager Dump; Collects The Lpar Manager Dump - Hitachi Compute Blade 500 Series User Manual
Logical partitioning manager
Hide thumbs
Also See for Compute Blade 500 Series:
- User manual (506 pages) ,
- Management module setup manual (362 pages) ,
- Web console users manual (240 pages)
Table of Contents
Advertisement
Check the LPAR manager Dump
Note:
•
The LPAR manager Dump is saved in non-volatile storage of the
Management Module. If a failure occurs, the dump may be automatically
collected. LPAR manager dump which has been automatically collected
will be overwritten by the LPAR manager dump manual operation. Check
first whether the LPAR manager dump has been automatically collected,
before the manual operation.
It is unnecessary to reboot LPAR manager after collecting the LPAR
manager dump.
Check the LPAR manager dump files by operations as follows.
1
Display the LP system logs screen.
.
2
Set the level selection to "All level".
.
3
Check the LP System Logs which contains an Event of "LP dump
.
generation succeeded".
If there is an LP System Logs entry saying "LPAR manager dump generation
succeeded", contact maintenance personnel. If that kind of LP System Logs
entry has not been obtained, follow the instructions below.
Collects the LPAR manager Dump
1
Display the LP Options screen.
.
2
Place the cursor on the 'Execute' field under of "Take LP Dump" and press
.
[Enter] to display a sub-screen. Then select 'Yes' on the sub-screen and
press [Enter].
8-2
Hitachi Compute Blade 500 Series Logical partitioning manager User's Guide
Figure 8-1 LP system logs Screen (LPAR manager Dump Exist)
LPAR manager Dump Collection
Advertisement
Table of Contents
