set hcsm manager
Command
set hcsm manager -i <hcsm_ip_addr> [-ap <alert_port>] [-al
<alert_policy>] [-ai <alert_retry_interval>] [-at
<alert_retry_time>] [-F]
Description
Sets the HCSM management server.
Adds servers when IP address is not registered and updates the setting of
management server while IP address is registered. The item which omits
parameters is not changed.
Role
Chassis
Parameters
-i <hcsm_ip_addr>
IP address of HCSM management server
This is an IPv4 address or IPv6 address.
-ap <alert_port>
Alert port number.
-al <alert_policy>
Alert report level.
-ai <alert_retry_interval>
Alert retry interval (min)
-at <alert_retry_time>
Alert retry duration (min).
Port number of HCSM management server which receives alert
Range is from 1 to 65535.
all : Notify all events.
warning : Notify failure and warning events.
alert : Notify failure events.
disable : Notify only control events.
Retry interval at time of alert transmitting failure (min).
Range is from 1 to 4.
Retry continuation time at time of alert transmitting failure (min).
Range is from 4 to 15.
CLI command
Hitachi Compute Blade 500 Series CLI Console User's Guide
2-243