Hitachi Compute Blade 500 Series User Manual page 266

In SMP configuration, specify the primary server blade to show hardware
maintenance agent settings on the primary server blade.
Role
Chassis
Parameters
-b <blade_no>
Slot number of server blade in the server chassis.
Show items
-- Hardware maintenance agent setting --
Allow
Allowance or denial
Port number
Port number of hardware maintenance agent.
-- Hardware maintenance agent OS setting --
Slot
Slot number of server blade in the server chassis.
OS mode
Logical Partitioning
LPAR
Number of LP
IP address
IP address.
Registered time
Registered time of hardware maintenance agent.
2-248
Range is from 0 to 7.
Multiple selection is available.
If 'all' is specified for this parameter or this parameter is omitted, the
command shows all server blades.
enable : Allowance
disable : Denial.
Range is from 0 to 7.
basic : Logical Partitioning is disabled.
hvm : Logical Partitioning is enabled.
Time uses "YYYY-MM-DD hh:mm:ss" format.
CLI command
Hitachi Compute Blade 500 Series CLI Console User's Guide