Hitachi Compute Blade 500 Series User Manual page 127

• Firmware version
Role
Switch module privilege
Parameters
<sw_no>
Switch module number
Range is from 0 to 3.
Multiple selection is available.
If 'all' is specified for this parameter or this parameter is omitted, the
command shows all server blades.
Show items
-- Switch module firmware version --
Slot
Switch module number
Range is from 0 to 3.
Firmware version
Firmware version
Displays the firmware version of the switch module.
The firmware version information is showed up to four digits. For
firmware version with 5 or more digits, find it on the switch module
console.
----- : Switch modules are not installed, or firmware version
information is not retrieved.
Message
None
Example
[To display the firmware version of switch module 0.]
$ show sw-module firmware 0
-- Switch module firmware version --
Slot
Firmware version
S0002 : Command succeeded.
S0000 : Command was finished.
$
Hitachi Compute Blade 500 Series CLI Console User's Guide
: 0
: 10.7.H
CLI command
2-109