Hitachi Compute Blade 500 Series User Manual page 227

Role
Chassis
Parameters
None
Show items
-- FTP setting --
Allow
IPv4 connection permission
allow: IPv4 connections are permitted.
deny: IPv4 connections are prohibited.
Network address
If there is a limit on the IPv4 addresses from which FTP connections are
permitted, the network address indicating the range of permitted IPv4
addresses is displayed.
If there is no limit on the addresses from which connections are
permitted, "0.0.0.0" is displayed.
Subnetmask
If there is a limit on the IPv4 addresses from which FTP connections are
permitted, the subnet mask indicating the range of permitted IPv4
addresses is displayed.
If there is no limit on the addresses from which connections are
permitted, "0.0.0.0" is displayed.
-- FTP setting (IPv6) --
Allow
IPv6 connection permission
allow: IPv6 connections are permitted.
deny: IPv6 connections are prohibited.
Network address
If there is a limit on the IPv6 addresses from which FTP connections are
permitted, the network address indicating the range of permitted IPv6
addresses is displayed.
If there is no limit on the addresses from which connections are
permitted, "::" is displayed.
Prefix len
If there is a limit on the IPv6 addresses from which FTP connections are
permitted, the prefix length indicating the range of permitted IPv6
addresses is displayed.
If there is no limit on the addresses from which connections are
permitted, "0" is displayed.
Hitachi Compute Blade 500 Series CLI Console User's Guide
CLI command
2-209