Chassis; Show Chassis Setting - Hitachi Compute Blade 500 Series User Manual

- Unspecified address (::/128)
- Loopback address (::1/128)
- Multicast address (ff00::/8)
- The following global unicast addresses:
For static addresses:
Any address from ::2 to 00ff:ffff:ffff:ffff:ffff:ffff:ffff:ffff
For default gateways:
Any address from ::2 to 1fff:ffff:ffff:ffff:ffff:ffff:ffff:ffff
Any address from e000:: to fbff:ffff:ffff:ffff:ffff:ffff:ffff:ffff
Any address from fe00:: to fe7f:ffff:ffff:ffff:ffff:ffff:ffff:ffff
(5) For IPv4 address configuration, the following addresses cannot be
used:
- 0.xxx.xxx.xxx
- 127.xxx.xxx.xxx
- Any address from 224.xxx.xxx.xxx to 255.xxx.xxx.xxx
- Broadcast addresses (addresses whose host part is all 0s or all 1s)
(6) Module addresses are not checked for uniqueness.

Chassis

show chassis setting

Command
show chassis setting
Description
Shows the setting of chassis.
Role
Chassis
Parameters
None
Show items
-- chassis setting --
Chassis ID
Chassis ID
2-6
Maximum of 20 characters
CLI command
Hitachi Compute Blade 500 Series CLI Console User's Guide