Hitachi Compute Blade 500 Series User Manual page 15

• If you specify the setting to deny login attempts when the password
expires, the following message appears and the user cannot login
when a user who has the expired password attempts to log in:
Your password has expired.
• If you specify the setting that requires the password to be updated
when the password expires, the message below appears when a user
who has the expired password attempts to log in. Enter the current
and new passwords by following the displayed message. The
management module changes the password to enable the user to log
in.
Your password has expired. Please change the password.
Old password: (Enter the current password.)
New password: (Enter the new password.)
Retype password: (Enter the new password again.)
If you incorrectly enter the current password three times, the
connection with the CLI console is closed.
7 The following initial window is displayed after logging in to the
.
management module.
ProductName ModelName ModuleName
ALL RIGHTS RESERVED, COPYRIGHT (C), 2011, 2012, HITACHI, LTD.
Chassis ID : HITACHI
Firmware Revision : A0520
Tip: The following items appear on the initial window after logging in to
the management module.
• ProductName ModelName ModuleName
[ProductName] shows the product name
[ModelName] shows the name of model
[ModuleName] shows the name of module
In this case, Management Module is displayed in [ModuleName].
• ALL RIGHTS RESERVED, COPYRIGHT (C), 2011, 2012, HITACHI,
LTD.
To show the copy right.
• Chassis ID: HITACH
To show the chassis ID.
In this case, HITACHI is displayed.
• Firmware Revision: A0520
To show the management module firmware revision.
In this case, A0520 is displayed.
• $
To show the CLI prompt.
You can select the format of CLI prompt as follows:
- "cid(n)$": cid is the chassis ID. n is the slot number of the
management module or the initial setting (the setting at shipping
time).
Hitachi Compute Blade 500 Series CLI Console User's Guide
Common function
1-3