Show Blade Fc-Hba Backup - Hitachi Compute Blade 500 Series User Manual

I0044 : <Blade 0> Restore was started.
S0002 : Command succeeded.
S0000 : Command was finished.
$
Comment
None

show blade fc-hba backup

Command
show blade fc-hba backup [<blade_no>] -m <mezzanine_no>
Description
Backup date is shown when Hitachi fibre channel mezzanine card is installed.
Shows the following items of backup data for Hitachi fibre channel mezzanine
card installed in the server blade, including all stored backup generations.
Backup data is automatically stored in the management module and up to
five-generation data will be saved.
• Bank number to store backup data
• Backup time
Shows backup data for Hitachi fibre channel mezzanine card installed in a
specified server blade regardless of whether the server blade is in SMP
configuration or not.
Role
Server Blade
Parameters
<blade_no>
Slot number of server blade in the server chassis.
-m <mezzanine_no>
Slot number of mezzanine card on server blade.
Range is from 0 to 7.
Multiple selection is available.
If 'all' is specified for this parameter or this parameter is omitted, the
command shows all server blades.
Range is from 1 to 4.
Multiple selection is available.
If 'all' is specified, command is executed to all mezzanine cards.
CLI command
Hitachi Compute Blade 500 Series CLI Console User's Guide
2-307