Set Mgmt-Module Led - Hitachi Compute Blade 500 Series User Manual

Message
None
Example
[Clears the boot disable status of management module 0.]
$ clear mgmt-module boot-disable 0
W0001 : If confirm, this connect is lost.
Confirm? (y/[n]):y
If the boot disable status for the management module on the connection
destination is cleared, the session is disconnected.
Comment
Console session connecting to the management module in the server chassis
will be disconnected after execution of this command.

set mgmt-module led

Command
set mgmt-module led [<mgmt_no>] [-a] [-s] -l <led_type> -t
<led_on_off> [-F]
Description
Turns on or turn off the LID of management module.
Role
Chassis
Parameters
<mgmt_no>
Slot number of management module in the server chassis
-a
Control the active management module.
-s
Control the standby management module.
-l <led_type>
LED type.
Range is from 0 to 1.
Multiple selection is available.
If 'all' is specified for this parameter or this parameter is omitted, the
command shows all management modules.
CLI command
Hitachi Compute Blade 500 Series CLI Console User's Guide
2-115