Set Mgmt-Module Dns - Hitachi Compute Blade 500 Series User Manual

set mgmt-module dns

Command
set mgmt-module dns -p <priority> [-v4 <ipv4_addr>] [-v6
<ipv6_addr>] [-F]
Description
Sets the DNS (IPv6) to be used in the management LAN for management
modules.
You can set the following information:
• Information about whether to prioritize IPv4 DNS settings or IPv6 DNS
settings
• IPv4 DNS settings (a maximum of three addresses)
• IPv6 DNS settings (a maximum of three addresses)
Role
Network privilege
Parameters
-p <priority>
Priority
-v4 <ipv4_addr>
IP address (IPv4) of the DNS servers for IPv4 addresses
-v6 <ipv6_addr>
IP address (IPv6) of the DNS servers for IPv6 addresses
2-138
Specify whether to prioritize DNS servers for IPv4 address or DNS
servers for IPv6 addresses.
ipv4 : Prioritize IPv4 DNS servers
ipv6 : Prioritize IPv6 DNS servers
You cannot omit this parameter.
Specify a maximum of three IPv4 addresses separated by commas.
Do not enter space characters between the addresses.
All existing IP addresses for the DNS servers for IPv4 addresses will
be replaced by the specified addresses. Specify IP addresses for all
DNS servers to be used.
Specify a maximum of three IPv6 addresses separated by commas.
Do not enter space characters between the addresses.
All existing IP addresses for the DNS servers for IPv6 addresses will
be replaced by the specified addresses. Specify IP addresses for all
DNS servers to be used.
CLI command
Hitachi Compute Blade 500 Series CLI Console User's Guide