Sync Mgmt-Module Firmware - Hitachi Compute Blade 500 Series User Manual

Role
Chassis
Parameters
-F
Executes the command without inquiry.
Show items
None
Message
None
Example
[To synchronize the internal LAN settings of the active management module
with the internal LAN settings of the standby management module.]
$ sync mgmt-module int-lan
W0036 : If confirm, standby management module will be restarted.
Confirm? (y/[n]):y
I0112 : <Management module> Internal address synchronization
succeeded.
S0002 : Command succeeded.
S0000 : Command was finished.
$
Comment
Under the following conditions, you cannot execute this command:
• Only one management module is installed.
• The standby management module is not placed in the BootDisable status.
• The management module firmware and dictionary are currently being
updated.

sync mgmt-module firmware

Command
sync mgmt-module firmware [-F]
Description
Copies the management module firmware and dictionary of the active
management module to the standby management module, and then updates
the firmware of the standby management module. This operation restarts the
standby management module.
2-128
CLI command
Hitachi Compute Blade 500 Series CLI Console User's Guide