Hitachi Compute Blade 500 Series User Manual page 90

Mezzanine FRU
Expansion blade FRU
• Sensors information
When -s parameter is specified:
Temperature sensor
Voltage sensor
Specify at least one of parameters -h, -f, and -s. If you specify no parameter,
server blade information is not displayed. You can specify all parameters.
Information specified with parameters is displayed in order of Hardware, FRU,
and Sensor per server blade. Multiple server blades can be specified. If you
specify no server blade, information of all server blades are displayed.
Role
Server blade
Parameters
<blade_no>
Server blade number
-h
Server blade hardware information is shown. If this is omitted, hardware
information is not shown.
-f
Server blade FRU information is shown. If this is omitted, FRU information
is not shown.
-s
Server blade sensor information is shown. If this is omitted, sensor
information is not shown.
2-72
Type of information
Type of information
Range is from 0 to 7.
Multiple selections are available.
If "all" is specified for this parameter or this parameter is omitted, the
command is executed on all server blades.
CLI command
Hitachi Compute Blade 500 Series CLI Console User's Guide
Items
Product Information
Board Information
Product Information
MultiRecord Information
Sensor name
Sensor value
Sensor name
Sensor value
Items