Set Blade Ipmi Account - Hitachi Compute Blade 500 Series User Manual

User account number : 4
Use
User name
S0002 : Command succeeded.
S0000 : Command was finished.
$
Comment
Server blade models CB 520A A1, CB 540A A1/B1, CB 520H A1/B1/B2 are not
supported.

set blade ipmi account

Command
set blade ipmi account <blade_no> -a <account_no> [-u
<account_use>] [-n <user_name>] [-p <password>] [-l
<privilege_level>] [-F]
Description
Sets an IPMI user account for a server blade. You can set an IPMI user
account number from 2 to 9.
This sets an IPMI user account for the specified server blade, even in an SMP
configuration.
Set the following items:
• Enabled or disabled IPMI user account
• User name
• Password
• Privilege
Role
Server Blade
Parameters
<blade_no>
Slot number of the server blade in the server chassis.
-a <account_no>
IPMI user account number
2-88
: disable
:
Range is from 0 to 7.
You cannot specify multiple values.
Range is from 2 to 9.
CLI command
Hitachi Compute Blade 500 Series CLI Console User's Guide