Hitachi Compute Blade 500 Series User Manual page 157

-F
Specify this parameter to execute the command without displaying a
confirmation dialog box. You can omit this parameter.
Show items
None
Message
None
Example
[To configure one DNS server for IPv4 addresses and two DNS servers for
IPv6 addresses, and to prioritize the DNS servers for IPv6 addresses]
$ set mgmt-module dns -p ipv6 -v4 192.168.20.101 -v6
fe80::200:87ff:feb2:c24,fe80::200:87ff:feb2:c20
Confirm? (y/[n]):y
I0001 : Setting was completed.
S0002 : Command succeeded.
S0000 : Command was finished.
$
[To configure and prioritize two DNS servers for IPv6 addresses and to
disable the DNS servers for IPv4 addresses]
$ set mgmt-module mgmt-v6 dns -p ipv6 -v6
fe80::200:87ff:feb2:c24,fe80::200:87ff:feb2:c20
Confirm? (y/[n]):y
I0001 : Setting was completed.
S0002 : Command succeeded.
S0000 : Command was finished.
$
Comment
• To configure a DNS server for IPv4 addresses, use this command instead
of the command set mgmt-module mgmt-lan.
• If you execute this command, all information regarding DNS servers for
IPv4 addresses that was configured using the command set mgmt-module
mgmt-lan will be overwritten.
• Use parameters to specify the addresses of the DNS servers (for both
IPv4 and IPv6 addresses) to be used. If you omit the parameter -v4, all
settings for DNS servers for IPv4 addresses will be deleted. If you omit
the parameter -v6, all settings for DNS servers for IPv6 addresses will be
deleted.
• Checking the specified address The IPv4 and IPv6 addresses specified for
the DNS servers are configured only if they are determined to be valid
Hitachi Compute Blade 500 Series CLI Console User's Guide
CLI command
2-139