Hitachi Compute Blade 500 Series User Manual page 174

Description
Edits the connection information on LDAP server. The setting of the item
which omits the parameter is not to be changed.
Role
Account
Parameters
-v <ldap_valid>
LDAP enable/disable
-u <user_auth>
User authentication method
-h0 <ldap_hostname>
IP address of LDAP server (1st piece)
-h1 <ldap_hostname>
IP address of LDAP server (2nd piece)
-h2 <ldap_hostname>
IP address of LDAP server (3rd piece)
2-156
enable : enable
disable : disable
ldap : Authentication is performed by using the LDAP server only.
local : Authentication is performed by using the local and LDAP
servers.
This is an FQDN, IPv4 address, or IPv6 address (maximum of 127
characters).
Space cannot be used for head and last.
The character type which can be used for FQDN are alphabetic
character ([A-Z] [a-z]), number ([0-9]), hyphen (-), and period (.).
The IP address of the server is deleted when specify only space.
This is an FQDN, IPv4 address, or IPv6 address (maximum of 127
characters).
Space cannot be used for head and last.
The character type which can be used for FQDN are alphabetic
character ([A-Z] [a-z]), number ([0-9]), hyphen (-), and period (.).
The IP address of the server is deleted when specify only space.
This is an FQDN, IPv4 address, or IPv6 address (maximum of 127
characters).
Space cannot be used for head and last.
CLI command
Hitachi Compute Blade 500 Series CLI Console User's Guide