Hitachi Compute Blade 500 Series User Manual page 125

Parameters
<sw_no>
Switch module number
Range is from 0 to 3.
Multiple selection is available.
If 'all' is specified for this parameter or this parameter is omitted, the
command shows all server blades.
-h
Hardware information for the specified switch modules.
-f
FRU information for the specified switch modules.
-s
Sensor information for the specified switch modules.
Show items
-- Switch module hardware information --
Slot
Switch module number
Range is from 0 to 3.
• If -h is specified, the information below is displayed.
If no server blade is installed, "-----" is displayed.
-- Switch module –
Product name
Product name
Model name
Model name
Serial number
Serial number
Nameplate power [W]
Rated power (W)
• If -f is specified, the information below is displayed.
If no switch module is installed, nothing is displayed.
-- Switch module FRU information –
Switch module FRU items are displayed.
• If -s is specified, the information below is displayed.
If no switch module is installed, nothing is displayed.
-- Server blade sensor information --
-- Temp --
Hitachi Compute Blade 500 Series CLI Console User's Guide
CLI command
2-107