System Configuration - Hitachi Compute Blade 500 Series User Manual

No.
(4)
(5)
(6)
(7)
(8)
(9)
(10)
How to change displaying WWN
Place the cursor on Select Display on the upper right and press [Enter] to
display a sub-screen. On the sub-screen, select item to display, and press
[Enter].

System Configuration

The following functions are available in the System Configuration screen.
Example of System Configuration screen is below.
Hitachi Compute Blade 500 Series Logical partitioning manager User's Guide
Item
Port# Displays the port number of the FC.
SchMd Displays the FC's scheduling mode.
D: Allocated to an LPAR in the dedicated
mode.
S: Allocated to an LPAR in the shared
mode.
vfcID Displays the configured vfcWWNID if the
allocated FC is in the shared mode.
Displays "-" for anything other than the
shared FC.
WWPN Displays the FC's World Wide Port Name.
Displays "?" for anything other than the
Hitachi 4Gbps FC adapter.
WWNN Displays the FC's World Wide Node Name.
Displays "?" for anything other than the
Hitachi 4Gbps FC adapter.
WWPN Displays World Wide Name for FC
(Migration) temporarily used in LPAR migration in
concurrent maintenance mode. For details,
see the HVM Navigator User's Guide
Migration Functions. This item is displayed
when WWN (Migration) is selected in item
(1).
Displays "?" for an FC adapter other than
Hitachi product.
Displays "-" for an unsupported FC adapter.
Vfc Seed Displays the Vfc seed information used in
Info. creating WWN.
Pages Numerator: Displays the current page.
Denominator: Displays the total number of
pages.
Operation by LPAR manager Screen
Description
Supported
Default LPAR
Value manager
Version
- 01-0X~
D 01-0X~
- 01-0X~
- 01-0X~
- 01-0X~
- 01-3X~
- 01-0X~
- 01-0X~
7-59