Hitachi Compute Blade 500 Series User Manual page 154

device used by the LPAR, deactivate the LPAR using the PCI device and
activate another LPAR.
However, when the PCI devices in exclusive shared mode can be assigned
to a specified LPAR not to an LPAR activated first by setting "USB Auto
Allocation to LPAR" to "Disable".
See
Changing LPAR which using PCI Device
1 On the PCI Device Assignment Screen, place the cursor on the line of a
.
remote console and then press the [F5] key (Attach/Detach).
2 When the Device Attach/Detach sub-screen is displayed, select the
.
number following the screen.
¢
¢
3 Select 'Yes' on the displayed sub-screen and press [Enter].
.
5-24
Hitachi Compute Blade 500 Series Logical partitioning manager User's Guide
PCI Device Assignment on page 7-37
When you select a LPAR number, the remote console is connected to
the LPAR with the selected LPAR number (Attach). When the remote
console is already used by another LPAR, detach the remote console
from the LPAR, which is currently using the remote console, and
connect it to the LPAR with the selected number.
When "Detach only" is selected, the remote console is just
disconnected.
Figure 5-35 PCI Device Attaching Screen
Setup of LPAR manager
for further details.