Hitachi Compute Blade 500 Series User Manual page 212

No.
(5)
How to Return to the LPAR manager Menu from Each LPAR manager
Screen
Press [Esc] on each LPAR manager screen. If there are no settable items on
the displayed screen, the cursor is always positioned on the Esc: Menu
display. Pressing [Enter] in this status returns to the LPAR manager Menu
screen.
How to Activate (turn on) an LPAR
Press [F3]: Act in this screen to display a sub-screen, place the cursor on an
LPAR to activate on the sub-screen, and press [Enter]. You can perform
"Activate" only to deactivated LPARs.
How to Deactivate (Turn off) an LPAR
Note:
• When an LPAR is deactivated, the power source of the LPAR is turned off
and a guest OS operating on the LPAR is shut down forcibly. Particularly,
when an LPAR is deactivated while the guest OS operating on the LPAR is
loading or saving data in a disk, the disk might be destroyed. So, shut
down a guest OS operating on the LPAR instead of the deactivating on the
LPAR manager screen.
• When shutting down a guest OS operating on an LPAR, the guest OS
might be hang up in the final process. In such a case, deactivate the
LPAR. (As the connection between the LPAR and a disk has been
disconnected, the disk data is not destroyed)
7-8
Hitachi Compute Blade 500 Series Logical partitioning manager User's Guide
Item
F6: Adds an LPAR definition.
F7: Removes an LPAR definition.
F8: Switches from the LPAR manager
screen to an LPAR screen.
F9: Saves the LPAR manager configuration.
Alt+t: Refreshes the LPAR manager screen
display.
Alt+r: Shutdown the LPAR manager
system.
F3, F5, F6, and F7 are not available on the
LPAR where LPAR migration has failed.
LPAR Displays the LPAR manager firmware
manager version and the LPAR manager firmware
firmware internal version.
version
Operation by LPAR manager Screen
Description
Supported
Default LPAR
Value manager
Version
- 01-0X~