Hitachi Compute Blade 500 Series User Manual page 351

Message Content
LPAR manager
operation
What to do
Message Content
Explanation The maximum number of users has already been registered.
LPAR manager Aborts the specified process.
operation
What to do Delete unnecessary users, and then try adding a user again.
Message Content
Explanation
LPAR manager
operation
What to do
Message Content
Explanation
LPAR manager
operation
What to do
Message Content
Explanation
LPAR manager
operation
What to do
Hitachi Compute Blade 500 Series Logical partitioning manager User's Guide
Aborts the specified process.
Retry the process.
Maximum number of users exceeded.
Memory allocation failed (Fragmentation).
When you activated an LPAR, the memory capacity you specified
could not be secured.
Aborts LPAR activation.
The memory could not be secured due to fragmentation. Reduce
the memory allocation or try again to activate the LPAR after you
have deactivated a currently active LPAR.
Memory allocation failed (Insufficient).
When you activated an LPAR, the memory capacity you specified
could not be secured.
Aborts LPAR activation.
Reduce the memory allocation or try again to activate the LPAR
after you have deactivated a currently active LPAR.
When memory node is specified, execute either of following
procedure.
- Reduce the amount of the memory allocated to LPAR so that it
may become within the amount of the free memory in the node.
- Activate the LPAR required after deactivating the LPAR which is
using the memory in the Node.
Memory size is zero.
Because the memory size is zero, the LPAR cannot be activated.
Aborts LPAR activation.
Set a memory size and active the LPAR.
Messages
LPAR start failed.
9-17