Hitachi Compute Blade 500 Series User Manual page 281

No. Item
contact your reseller or consult
maintenance personnel.
(5) Time Mode Sets the SEL date and time mode.
GMT: GMT (Greenwich Mean Time) mode
Local-Time: Local time mode
The SEL time mode can be set when LPAR
SEL Time has been displayed in the display
time selection.
(6) Date and Displays the time selected in the display
Time time selection.
The format is "yyyy/mm/dd hh:mm:ss."
yyyy: Calendar year
mm: Month
dd: Day
hh: Hour (24-hour representation)
mm: Minute
ss: Second
The minimum value is 2000/01/01
00:00:00 and the maximum value is
2099/12/31 23:59:59.
The SEL time can be set when LPAR SEL
Time has been displayed in the display time
selection.
When the SEL time mode is local mode, the
time that has added the SEL time zone is
displayed.
When the SEL time mode is GMT, the SEL
time zone is not added.
The time stamp of the logical SEL to be
reported to the LPAR becomes this SEL
time.
(7) Time Zone Displays or sets which time zones the SEL
date and time belongs to.
When the SEL date and time mode is Local-
Time, the changes to this will automatically
adjust the SEL date and time.
You can specify it on 1-hour basis, and the
minimum value is -12 hours and the
maximum value is +12 or +14 hours.
You cannot set when the SEL date and time
mode is GMT.
The SEL time zone is set only when LPAR
SEL Time is displayed in the display time
selection.
Operation by LPAR manager Screen
Hitachi Compute Blade 500 Series Logical partitioning manager User's Guide
Description
Supported
Default LPAR
Value manager
Version
Local-Time 01-0X~
- 01-0X~
LPAR 01-0X~
manager
System
Time Zone
7-77