3
E3. LPAR manager screen is shown.
.
Tip:
•
LPAR manager Settings
1
Set the LPAR manager System time zone and set the time adjustment of
.
the LPAR manager System time by NTP.
Note:
•
5-6
Hitachi Compute Blade 500 Series Logical partitioning manager User's Guide
Figure 5-4 Connecting Management Module screen
Figure 5-5 LPAR manager Screen
Press [Ctrl] + [b] when returning to the console screen of the
management module from LPAR manager screen. Input "exit" and
press [Enter] when the CLI console is shut downed.
To adjust the LPAR manager system time by the NTP server is
recommended. If the LPAR manager is rebooted (including an
unexpected LPAR manager system failure and switching N+M) after
running for a long time without adjusting the LPAR manager system
time, the time of guest OS appear without adjustment.
Setup of LPAR manager