Hitachi Compute Blade 500 Series User Manual page 59

Table 1-39 Setting Items for VLAN Switch
Setting Item
Port Connection
Port Speed
VLAN Mode and VLANID
Promiscuous Mode
Hitachi Compute Blade 500 Series Logical partitioning manager User's Guide
Figure 1-30 Image of VLAN Switch
Target Port
Port1 - Port16
Port17
Port1 - Port16
Port17
Port1 - Port16
Port17
Port1 - Port16
LPAR manager Functions
Settings
Assign to LPAR on the Virtual NIC
(VNIC) Assignment screen.
Connect to physical cables.
With the Onboard NIC, no cable is
required.
Auto Negotiation (This setting cannot be
changed.)
- Supports 1000BASE-TX.
Auto Negotiation (This setting cannot be
changed.)
- Supports 10/100/1000/10000BASE-TX
[VLAN mode]
- Undef (Default)
- Tagged
- Untagged
Only 1 VLAN mode can be set per LPAR.
[VLAN ID]
- Tagged : Up to 16 VLAN IDs out of the
range from 1 to 4094, or Assign all (ID).
- Untagged : Only one (1) VLAN ID out
of the range from 1 to 4094
Tagged All (This setting cannot be
changed).
Configured to transmit all packets.
- Restricted
Receives only the packets to the target
LPARs(MAC addresses).
- Through (default)
Receives all the packets in the same
network segment.
1-45