Hitachi Compute Blade 500 Series User Manual page 353

Message Content
LPAR manager
operation
What to do
Message Content
Explanation The password you entered did not match.
LPAR manager Aborts the specified process.
operation
What to do Try setting the password again.
Message Content
Explanation The specified port number is outside the range of values that can
be used for the current connection mode for the virtual COM
console.
LPAR manager Aborts the specified process.
operation
What to do Check the connection mode and port number for the virtual COM
console, and then retry the process.
Message Content
Explanation
LPAR manager
operation
What to do
Message Content
Explanation
LPAR manager
operation
What to do
Message Content
Explanation
Hitachi Compute Blade 500 Series Logical partitioning manager User's Guide
Over the maximum number of activated LPARs (X).
Aborts the LPAR activation.
Deactivate an LPAR currently activated, and then activate the
LPAR again.
Password mismatch.
Port number for virtual console is out of range for specified
connection mode.
Press any key first. Then press F10 key next.
To make the changed setting effective, you need to press [F10].
Waits for the [F10] key to be pressed.
Press any key, wait for the output message to disappear, and
then press the [F10] key.
Resource lock failure.
Locking resources failed when you updated configuration
information.
Locking resources failed when you performed a system or LPAR
operation.
Locking resources failed when you updated the RAR of a NIC.
Aborts the specified process.
Retry the specified process.
Sampling time Error
Sampling time setting failed in LPAR Usage screen.
Messages
9-19