Hitachi Compute Blade 500 Series User Manual page 348

Message Content
What to do
Message Content
Explanation
LPAR manager
operation
What to do
Message Content
Explanation
LPAR manager
operation
What to do
Message Content
Explanation
LPAR manager
operation
What to do
Message Content
Explanation
LPAR manager
operation
What to do
Message Content
Explanation
LPAR manager
operation
What to do
9-14
Hitachi Compute Blade 500 Series Logical partitioning manager User's Guide
Inhibit ICV request for the operation
Wait a while and try again.
Insufficient Processor resource
When you tried to set the number of dedicated logical processors,
a sufficient number of physical processors could not be secured.
When an LPAR is activated, the physical processors assigned to
the LPAR cannot be secured.
Aborts LPAR activation.
Reduce the number of processors allocated or try again to
activate the LPAR after you have deactivated a currently active
LPAR.
Alternatively, check the Logical Processor Configuration screen.
Internal error (Cannot get lock).
The LPAR manager logical firmware detected an internal error.
Aborts the specified process.
Contact your reseller or maintenance personnel.
The numeric value you specified for the LPAR manager System
Date and Time change is invalid.
Aborts the specified process.
Correct the value and retry.
Invalid in the scheduling mode.
This operation is invalid in the scheduling mode of target device.
Aborts the specified process.
Reconsider the specified process.
Invalid Input Data.
The new data you tried to set is invalid and cannot set.
Aborts the setting process.
Set different data.
Messages
Invalid hour data.