Virtual Nic Assignment - Hitachi Compute Blade 500 Series User Manual

Virtual NIC Assignment

The followings are executed on the VNIC Assignment screen. Assign a VNIC
to each LPAR.
Example of VNIC Assignment is below.
The following table describes each item on the screen.
No.
(1)
(2)
(3)
(4)
7-42
Hitachi Compute Blade 500 Series Logical partitioning manager User's Guide
Figure 7-14 VNIC Assignment Screen
Table 7-16 Details of the VNIC assignment Screen
Item
# Displays the LPAR numbers.
Name Displays the LPAR name.
Sta Displays the LPAR status.
Act (Activate): The LPAR is powered on.
Dea (Deactivate): The LPAR is powered off.
Fai (Failure): The LPAR cannot be used due
to an unrecoverable failure. Reboot LPAR
manager when this happens. If rebooting
LPAR manager cannot solve the problem,
contact the reseller from which you
purchased this equipment or consult
maintenance personnel.
#VNIC Displays the number of Logical NICs
assigned to LPARs.
Operation by LPAR manager Screen
Description
Supported
Default LPAR
Value manager
Version
- 01-0X~
NO_NAME 01-0X~
Dea 01-0X~
0 01-0X~