Hitachi Compute Blade 2000 User Manual page 516

Time synchronization information by NTP is described in the table below.
Item Description of item
Time synchronization
NTP
by NTP
NTP server information is described in the table below.
Item Description of item
No. NTP server number
Hostname NTP server address
Connection status to
Status
NTP server
With the following conditions, time synchronization is not
available:
NTP server address is specified as the domain name.

The management module with time synchronization by

NTP enabled cannot be connected to the DNS server.
If you enter 128 or more characters as an NTP server

address, Internal error message appears and setting
fails.
NTP disconnection alert policy is described in the table below.
Item Description of item
Policy on alerting
Policy disconnection from a
NTP server
Value Description of value
Enable The setting of time synchronization
by NTP enabled.
Disable The setting of time synchronization
by NTP disabled.
Value Description of value
NTP0 Up to 4 NTP servers can be
to NTP3 registered.
Domain FQDN for NTP servers: displays up
name to 127 characters as ASCII code.
IP address IP address for NTP servers
------- No NTP server is set.
Not
Connection is unavailable.
connect
Connection is available but the NTP
Connect
server is not synchronized: a server
with higher priority exists.
Connection is available and the NTP
Sync
server is synchronized.
Unknown Connection status is unknown.
------- No NTP server is set.
Value Description of value
Immediately Immediately determines and alerts
disconnection.
x minutes Determines and alerts
being disconnection in x minutes after
disconnected disconnected.
Values (x): 1 to 1440 minutes
Disable Not alerts if disconnected.
465