Hitachi Compute Blade 2000 User Manual page 377

Message
Two BBUs are connected to the adapter. This is
not a supported configuration. Battery and
caching operations are disabled. Remove one
BBU and reboot to restore battery and caching
operations. If dirty cache is lost in this boot that
could have been because of dual battery
presence.
Firmware did not find valid NVDATA image.
Please program valid NVDATA image and restart
your system. Press any key to continue
IR to MR Migration failed. Press any key to
continue with MR defined NVDATA values
There are offline or missing virtual drives with
preserved cache. Please check the cables and
ensure that all drives are present.
There are offline or missing virtual drives with
preserved cache. Please check the cables and
ensure that all drives are present. Press any key
to enter the configuration utility.
Incompatible secondary iButton present! Please
insert the correct iButton and restart the system.
Press any key to continue but original equipment
manufacturer (OEM) specific features will not be
upgraded!
Upgrade Key Missing! An upgrade key was
present on a previous power cycle, but it is not
connected. This can result in inaccessible data
unless it is addressed. Please re-attach the
upgrade key and reboot.
A snapshot rollback is in progress on VDs X,
controller cannot boot until the rollback operation
completes. Press any key to enter the
configuration utility.
The Following VDs: X have Rollback active and
corresponding Repository missing. If you continue
to boot the system or enter the configuration
utility, these VDs will become unusable Press any
key to Continue.
Snapshot Repository VDs X have been removed
from your system or are no longer accessible.
Please check your cables and ensure all disks
are present. If you continue to boot the system,
the snapshot related data will be lost.
Description
When this message is displayed, contact your
reseller or call maintenance personnel.
Migration is not supported. When this message is
displayed, contact your reseller or call
maintenance personnel.
Logical drives are not found. When this message is
displayed, contact your reseller or call
maintenance personnel.
When this message is displayed, contact your
reseller or call maintenance personnel.
The upgrade key is not supported. When this
message is displayed, contact your reseller or call
maintenance personnel.
Snapshot is not supported. When this message is
displayed, contact your reseller or call
maintenance personnel.
326