Hitachi Compute Blade 2000 User Manual page 671

Select a menu item from the table below to execute the function.
Menu
F. FTP setting.
T. HTTP/HTTPS setting.
S. SSH setting.
E. Telnet setting.
H. Connection allowed
network setting for all of
above protocols.
A. Show all service setting.
Q. Quit
If you enter F in the SEC command menu, and then press Enter, you can set the
permissible network settings for connecting an FTP server. You can choose to allow or
deny all access, or allow access only from an address range defined by a particular
network address and subnet mask. To save the permissible setting for the network,
enter Y and press Enter. To cancel the setting, enter N and press Enter, or just press
Enter.
(F,T,S,E,H,A,[Q]) : F
Allow all? (Y,[N]) : N
Deny all? (Y,[N]) : N
Network address : 192. 0. 0. 0
([Unchange]) : (Enter)
Subnetmask : 255. 0. 0. 0
([Unchange]) : (Enter)
-- FTP setting --
Allow : Allow
Network address : 192. 0. 0. 0
Subnetmask : 255. 0. 0. 0
Confirm? (Y,[N]) : Y
- Writing setting was completed.
Hit enter key. (Enter)
If you enter T in the SEC command menu, and then press Enter, you can set the
permissible network settings for connecting an HTTP/HTTPS server. You can choose
to allow or deny all access, or allow access only from an address range defined by a
particular network address and subnet mask. Settings for HTTP include disabling
HTTP/HTTPS, enabling HTTP, and enabling HTTPS. To save the permissible setting
for the network, enter Y and press Enter. To cancel the setting, enter N and press
Enter, or just press Enter.
Sets the FTP server.
Sets the HTTP server.
Sets the SSH server.
Sets the Telnet server.
Sets the permitted network settings for all four protocols
(FTP, HTTP, SSH, and Telnet).
Displays the current values of all settings set by the SEC
command.
Quits the SEC command.
(Enter)
(Enter)
(Enter)
(Enter)
620
Description