Hitachi Compute Blade 2000 User Manual page 610

If you enter C in the VLAN setting menu and press Enter, the current VLAN setting is
displayed. At the prompt, enter the VLAN ID, and the setting value with no setting of
external connection ports is displayed. At the prompt, enter an external connection port,
and the new setting value is displayed. A confirmation message appears. Enter Y and
press Enter, and the VLAN setting is saved. To cancel the setting change, enter N and
press Enter, or just press Enter.
(M,C,D,[Q]) : C (Enter)
-- VLAN setting --
Partition
VLAN ID Ext port M 0 1 2 3 4 5 6 7 0 1 2 3 4 5
------- -------- - --------------- -----------
Untag0 MGMT-0 X - X X X X X X X X X X X X X
Untag1 MGMT-1 - X - - - - - - - - - - - - -
VLAN ID (2-4000,[Q=Quit]) : 2 (Enter)
Ext port : MGMT-0
(0=MGMT-0,1=MGMT-1,[Unchange]) : 0 (Enter)
-- VLAN setting --
VLAN ID Ext port M 0 1 2 3 4 5 6 7 0 1 2 3 4 5
------- -------- - --------------- -----------
Untag0 MGMT-0 X - X X X X X X X X X X X X X
Untag1 MGMT-1 - X - - - - - - - - - - - - -
2 MGMT-0 - - - - - - - - - - - - - - -
3
Confirm? (Y,[N]) : Y (Enter)
- Writing setting was completed.
Hit enter key. (Enter)
Switch module
Partition Switch module
559