Hitachi Compute Blade 2000 User Manual page 595

If you enter C in the LC command menu and press Enter, the current LC command
setting value is displayed.
(C,M,P,SW,V,[Q]) : C (Enter)
-- Management module LAN interface setting --
IP address Subnetmask
--------------- --------------- --------------- --------
172. 16.201. 1 255.255.
-- Management module DNS setting --
D IP address
- ---------------
0 0. 0. 0. 0
1 0. 0. 0. 0
2 0. 0. 0. 0
-- Partition network setting --
P IP address Subnetmask
- --------------- --------------- --------------- --------
0 172. 16.201. 10 255.255.
1 172. 16.201. 11 255.255.
2 172. 16.201. 12 255.255.
3 172. 16.201. 13 255.255.
4 172. 16.201. 14 255.255.
5 172. 16.201. 15 255.255.
6 172. 16.201. 16 255.255.
7 172. 16.201. 17 255.255.
-- Switch module current network setting --
SW IP address Subnetmask
-- --------------- --------------- ---------------
0 ------------- -------------
1 ------------- -------------
2 ------------- -------------
3 ------------- -------------
4 ------------- -------------
5 ------------- -------------
-- Switch module network setting --
SW Ext IP address
-- ---- ---------------- --------------- --------------- -------- -----------
0 Ext 0. 0. 0.
1 Int --------------
2 Int --------------
3 Int --------------
4 Int --------------
5 Int --------------
Default gateway Ext port
0. 0 0. 0. 0.
Default gateway Ext port
0. 0 0. 0.
0. 0 0. 0.
0. 0 0. 0.
0. 0 0. 0.
0. 0 0. 0.
0. 0 0. 0.
0. 0 0. 0.
0. 0 0. 0.
Default gateway
-------------
-------------
-------------
-------------
-------------
-------------
Subnetmask Default gateway Ext port Synchronize
0 0. 0. 0. 0 0.
------------- -------------
------------- -------------
------------- -------------
------------- -------------
------------- -------------
544
0 MGMT-0
0. 0 MGMT-0
0. 0 MGMT-0
0. 0 MGMT-0
0. 0 MGMT-0
0. 0 MGMT-0
0. 0 MGMT-0
0. 0 MGMT-0
0. 0 MGMT-0
0. 0. 0 MGMT-0
------
------
------
------
------
No
---------
---------
---------
---------
---------