Hitachi Compute Blade 2000 User Manual page 770

The management module
# Item
1 IP address
2 Subnet mask
3 Default gateway
4 DNS0 to DNS2
The partition
# Item
1 Partition
2 IP address
3 Subnet mask
4 Default gateway
The current switch module settings
# Item
1 Module
2 IP address
3 Subnet mask
4 Default gateway
The settings held by the management module
# Item
1 Module
2 Connection type
3 IP address
4 Subnet mask
5 Default gateway
6 Synchronization
Description
The IP address of the management module.
The subnet mask of the management module.
The default gateway of the management module.
The DNS settings of the management module.
These settings appear as IP addresses.
Description
The partition number of the physical partition.
The IP address of the physical partition.
The subnet mask of the physical partition.
The default gateway of the physical partition.
Description
The module number.
IP address of the management interface in the switch
module
Subnet mask of the management interface in the switch
module
Default gateway of the management interface in the
switch module
Description
The module number.
Destination to which the switch module connected to.
Can connect to the management LAN network, internal
LAN network, or a port in the switch module.
IP address of the management interface in the switch
module.
Asterisk (*) is displayed when the switch module does not
support the interface to view/update "Management
interface LAN setting".
Subnet mask of the management interface in the switch
module.
Default gateway of the management interface in the
switch module.
Displays whether or not to apply the management
module setting to the switch module.
Yes: Currently the management module and switch
module have the same setting. When synchronization is
executed, the management module setting will be applied
to the switch module.
Yes!: Currently the management module and switch
module have the different settings. When synchronization
719
Edit
Yes
Yes
Yes
Yes
Edit
Yes
Yes
Yes
Edit
-
-
-
-
Edit
-
Yes
Yes
Yes
Yes
Yes