Hitachi Compute Blade 2000 User Manual page 518

 PS command
Status of all modules is displayed. Enter PS at the prompt, and press Enter.
5713RF0 NNNNN(0)SVP> PS
<< PS - Show power and other sensors. >>
-- Sensor menu --
C. Show information of server chassis.
M. Show sensors of management module.
P. Show sensors of partition.
SW. Show sensors of switch module.
PS. Show sensors of power supply module.
F. Show sensors of fan module.
Q. Quit.
(C,M,P,SW,PS,F,[Q]) :
Select a menu you require from the following list, and execute it.
Menu
Show information of
C.
server chassis.
Show sensors of
M.
management module.
P. Show sensors of partition.
Show sensors of switch
SW.
module.
Show sensors of power
PS.
supply module.
Show sensors of fan
F.
module.
Q. Quit
If you enter C in the PS command menu and press Enter, the server chassis
information is displayed. The screen display may be different depending on your
configuration.
-- Current data of Server chassis --
Name : GVX-RE2A1X11
Nameplate Power : 1023(W)
Present AC Power : 1327(W)
Present DC Power : 1109(W)
Average DC Power : 1110(W)
Maximum DC Power : 1119(W)
Minimum DC Power : 1103(W)
Airflow Volume : 10.91(m^3/min)
Current Power Cap : -----------
Minimum Power Cap : 973(W)
(Enter)
Displays the server chassis.
Displays sensors of the management module.
Displays sensors of the partition.
Displays sensors of the switch module.
Displays sensors of the power supply module.
Displays sensors of the fan module.
Quits the PS command.
467
Description