Connection With Serial Cable - Hitachi Compute Blade 2000 User Manual

Connection with serial cable

Use a RS-232C cross cable (D-SUB9 pin female-female) for the serial port of the
system console. Communication rate setting at the time of shipment is 9600 bps.
System console terminal
RS-232C cross cable
Connect the serial port in the front panel of the I/O slot expansion unit to your system
console terminal using a RS-232C cross cable. Since two I/O modules are installed,
connect to the I/O module with the STS that lights solid orange. Prepare the RS-232C
cross cable to connect to the terminal.
873