Silvercrest SDB 2200 D2 Operating Instructions Manual page 27

Risk of electric shock!
•The rating of the local power supply must correspond with
the details given on the rating plate of the appliance.
•To avoid potential risks, arrange for defective appliances
to be checked and possibly repaired by a qualified specialist
workshop, or contact our Customer Service Department.
•Arrange for defective power plugs and/or cables to be
replaced immediately by qualified technicians or our
Customer Service Department.
•To disconnect from the power source, only pull the plug
itself, not the cable.
•Never bend (kink) or crush the power cable. Arrange it in
such a way that it cannot come into contact with hot surfa-
ces and so that no-one can step on it or trip over it.
•Remove the plug from the power socket after every use,
and before cleaning or filling with tap water.
•Always unwind the power cable fully before switching on,
and do not use an extension cable.
•Never touch the power cable or the plug with wet hands.
•Never use the steam iron near a bath, shower, wash basin
or other vessel containing water. The proximity of moisture
presents a danger, even when the appliance is switched off.
•Under no circumstances should you submerge the steam
iron in liquid or permit liquids to penetrate the casing of the
steam iron. Do not expose the appliance to humidity and
do not use outdoors. Should liquids enter the casing, unplug
the appliance from the socket immediately and arrange for
it to be repaired by a qualified technician.
- 24 -