HP 205 G1 Maintenance & Service Manual page 114

Table 10-1 Numeric Codes and Text Messages (continued)
Control panel message
1801-Microcode Patch Error
2200-PMM Allocation Error during MEBx
Download
2201-MEBx Module did not checksum correctly
2202-PMM Deallocation Error during MEBx
cleanup
2203-Setup error during MEBx execution
2204-Inventory error during MEBx execution
106 Chapter 10 POST Error Messages
Description
Processor is not supported by ROM BIOS.
Memory error during POST execution of the
Management Engine (ME) BIOS Extensions
option ROM.
Memory error during POST execution of the
Management Engine (ME) BIOS Extensions
option ROM.
Memory error during POST execution of the
Management Engine (ME) BIOS Extensions
option ROM.
MEBx selection or exit resulted in a setup
failure.
BIOS information passed to the MEBx resulted
in a failure.
Recommended action
Drivelock is Disabled. Lastly, change Storage >
Storage Options > SATA Emulation back to
RAID and select File > Save Changes and Exit.
▲ Upgrade BIOS to proper version.
1. Reboot the computer.
2. Unplug the power cord, re-seat the
memory modules, and reboot the
computer.
3. If the memory configuration was recently
changed, unplug the computer, restore
the original memory configuration, and
reboot the computer.
4. If the error persists, replace the system
board.
1. Reboot the computer.
2. Unplug the power cord, re-seat the
memory modules, and reboot the
computer.
3. If the memory configuration was recently
changed, unplug the power cord, restore
the original memory configuration, and
reboot the computer.
4. If the error persists, replace the system
board.
1. Reboot the computer.
2. Unplug the power cord, re-seat the
memory modules, and reboot the
computer.
3. If the memory configuration was recently
changed, unplug the power cord, restore
the original memory configuration, and
reboot the computer.
4. If the error persists, replace the system
board.
1. Reboot the computer.
2. Unplug the power cord, re-seat the
memory modules, and reboot the
computer.
3. If the memory configuration was recently
changed, unplug the power cord, restore
the original memory configuration, and
reboot the computer.
4. If the error persists, replace the system
board.
1. Reboot the computer.
2. If the error persists, update to the latest
BIOS version.