Configuring Of Boot Device - Fujitsu PRIMEQUEST 2000 Series Configuration Manual

4.4. Configuring of Boot Device

To configure boot device, select [Configure Boot Devices] in menu of Emulex OneConnect FCoE BIOS Utility
screen, and press <Enter> key.
Figure 4-9
8 boot devices are listed. It is recommended that you configure against only devices which can be booted. You
should not configure against devices which can't be booted.
Primary Boot Device is a device that is booted first and is displayed being added "Primary Boot" in rightmost
column of the line as shown below.
If the system hit a hardware error and failed to boot the first entry, it boots from the next bootable entry.
Select a boot entry, and press <Enter> key.
Figure 4-10
Copyright 2016 FUJITSU LIMITED 17 CA92344-0966-01