To Take Effect Of Settings - Fujitsu PRIMEQUEST 2000 Series Configuration Manual

Select ｢First LUN 0 device｣, and press <Enter> key.

4.5.5. To Take Effect of Settings

After you complete settings, as described above, in FCoE BIOS Utility menu, press <Esc> key, and exit this
menu.
A message as below in the figure displays, enter <Y> to reboot the system. So the settings you have done are
taken effect to the system.
If you have done till "4.5.5. To Take Effect of Settings", go to "6. OS Installing".
Copyright 2016 FUJITSU LIMITED
Figure 4-23
Figure 4-24
25 CA92344-0966-01