Additional Settings Of Boot Device - Fujitsu PRIMEQUEST 2000 Series Configuration Manual

5.3.1. Additional Settings of Boot Device

To check the disk array which are connected, select [Scan for Fibre Devices], and press <Enter> key.
In SAN Discovery Target List, confirm the target boot device, move cursor onto [Go to Configuration Main
Menu] and press <Enter> key to return to previous screen.
If you cannot find your target boot device in the list, check if converged fabric switch and FCoE storage are
correctly set and the cables are correctly connected.
Copyright 2016 FUJITSU LIMITED
Figure 5-20
Figure 5-21
36 CA92344-0966-01