Table of Contents
Advertisement
C9010 Hardware Description
The C9010 switch is part of Dell Networking's next-generation LAN solution, providing a scalable switch
that offers a path to higher density 10GbE and 40GbE capability. You can deploy the C9010 switch as an
access or aggregation/core switch for installations in which a modular switch is preferred. For larger port
requirements, you can also connect C1048P port extenders (PEs) as access devices.
The C9010 switch supports up to two hundred and forty-eight 1GbE, two hundred and forty-eight
10GbE, or sixty 40GbE ports with a combination of port speeds and media types, such as copper, fiber,
and direct attach copper (DAC). It is an 8U chassis (18"/45.72 cm depth) that fits into a standard 19"/48.26
cm rack or cabinet. The C9010 chassis supports the following components:
•
Two full-width route processor modules (RPMs) with four 1/10GbE SFP+ uplinks per module
•
Ten half-width Ethernet line cards of the following types:
– 6-Port 40 Gigabit Ethernet QSFP+
– 24-Port 1/10 Gigabit Ethernet SFP+
– 24-Port 1/10 Gigabit Ethernet Base-T RJ-45
•
Three hot-swappable fan modules with side-to-side airflow (draws air through ventilation holes on
the right side of the chassis and expels air through ventilation holes on the left side)
•
Four 1450/2900 watt AC power supply units (PSUs)
The slot numbers of all installed components are shown in the following figure.
4
2
C9010 Hardware Description
Advertisement
Table of Contents
