LED
Fan status LED
Power supply status
LED
SFP+ 10GbE port 0 to
3: Link LED
RJ-45 Management
Ethernet port: Link LED
(left LED below port)
RJ-45 Management
Ethernet port: Activity
LED (right LED below
port)
Figure 28. 40GbE QSFP+ Port LEDs
1.
4x10G Port Link/Activity LEDs above each
40GbE QSFP+ port
Table 3. 40GbE QSFP+ Port LEDs
LED
Color / Description
•
40GbE Port Link/
Activity LED
•
(leftmost LED)
•
40
Color / Description
•
Flashing amber — Error condition or reload is in progress.
•
Solid green — Normal operation
•
Flashing amber — Error condition in a fan module
•
Solid green — Normal operation
•
Flashing amber — Error condition in a PSU
•
Off — No data link activity
•
Solid green — Link is up and operational.
•
Flashing green — Link is up and transmitting/receiving data.
•
Solid amber — 1G port is up and the interface is enabled.
•
Flashing amber — 1G port is transmitting/receiving data.
•
Flashing amber (1 second on, 1 second off) — Port beacon used to locate
SFP+ port
•
Off — No data link activity
•
Solid green — Link is up and operating at maximum port speed; if auto-
negotiated, port is operating at 1G.
•
Solid amber — Link is up and operating at lower speed; if auto-negotiated,
port is operating at 10/100M.
•
Off — No data link activity
•
Flashing green — Link is up and transmitting/receiving data.
Off — No link or interface is disabled.
Solid green — 40G link is up and 40GbE QSFP+ interface is enabled.
Flashing green — 40GbE port is transmitting/receiving data at maximum 40G
speed.
2.
Module LED
Installing the Hardware