Table of Contents
Advertisement
Figure 1. C9010 Chassis — Installed Components with Slot Numbers
Unpacking the Switch
The switch and its accessories ship in a single container. Before unpacking the switch, inspect the
container and immediately report any evidence of damage. Verify that you have received your ordered
items. If any item is missing or damaged, contact your Dell Networking representative or reseller for
assistance.
CAUTION: Always wear an electrostatic discharge (ESD)-preventive wrist or heel ground strap
when handling the switch and its components. Ground yourself by using an antistatic wrist strap
or other device and connect it to the ESD grounding jack on the chassis. As with all electrical
devices of this type, take all necessary safety precautions to prevent injury when installing this
system.
CAUTION: Use an equipment lift or pallet jack to lift the shipping container with the chassis.
Lifting the system by its shelves causes damage to the chassis.
Unpack the C9010 by carefully removing the device from the container and place it on a secure and
clean surface.
C9010 Hardware Description
5
Advertisement
Table of Contents
