Led Indicator Details - Toshiba IPEDGE User Manual

IPedge
The Basics

LED Indicator Details

Table 5 LED Indicators
Feature
Extension In-Use access outside line
while ringing
Incoming Call
if using Pooled Line Grp, the hold
Hold – outside line indication is only at the station
that places the call on hold.
during consultation/transfer to
Hold – Consultation
another station
Hold – Exclusive outside line
when held call recalls your idle
Hold – Recall
station
Hold – Exclusive
Exclusive Recall
Recall
while station ringing
Internal Call
outside call transferred to your
Busy Station
busy station from a designated
Transfer
station or:
After disconnecting first call
Conference call
Conference
26
Each line and Programmable Feature Button has a LED next to it which
indicates the status of the line or feature associated with the button. Line
LEDs light red or green and flash at varying rates to indicate call status (see
table below).
LED
2 seconds On, 1/8 second Off
— 1/8 second On/Off
1 second on at 10 pulses/sec-
ond —1 second Off
4 pulses/second for 1/8 second
On/Off
10 pulses/second
10 pulses/second
1 second at 2 pulses/second,
1 second at 10 pulses/second
1 second at 2 pulses/second,
1 second at 10 pulses/second
Your extension button flashes
10 pulses/second—1 second
Off
4 pulses/second, 1/8 second
On/Off
10 pulses/second
10 pulses/second
TOSHIBA
Interval Rates
Your Station (Green) Other Station (Red)
steady
one second On/Off
1/2 second On/Off
steady
steady
flashes
steady
[SDN] red flashing or
green ringing
3/4 second on, 1/8
second Off
2 pulses/second
steady
IPedge UG 12/15