Station Call Forward Procedures; Program Call Forward Via Enterprise Manager; Example: Call Forward To Extension - Toshiba IPEDGE User Manual

Station Call
Forward
Procedures
Program Call
Forward via
Enterprise
Manager
Example: Call
Forward to
extension
IPedge UG 12/15
5.
Call Forward - No Answer –
of rings (preset individually for each station)
6.
Call Forward Busy/Do Not Disturb/No Answer –
Busy, DND, or when call is unanswered after a set number of rings
7.
Call Forward Cancel
Call Forward functions are registered by entering the commands outlined below,
or by programming a Programmable Feature Button (FB) on the station.
To use the Call Forward button sequence:
Follow the instructions in
•
Some features may require additional input:
•
Destination extension or telephone number
destination numbers may be internal extensions or external telephone
numbers. If the destination is an external number, enter outside line
access code (e.g. 9) + telephone number +
a 32 digit maximum
• (Call Forward No Answer Timer) – Enter the number of
Timer
seconds (08 - 60). The telephone should ring before forwarding the
call.
•
Call Forward Pass Code
be preset by the System Administrator. This will allow one station to
activate the call forward setting for another. Users must enter the Call
Forward pass code for the station to be forwarded
To program call forward button destination using Enterprise Manager:
1. Login to Enterprise Manager
8. Select Station > Station Assignment
9. Access the IPT to program by double clicking the station number or check the
box to the left of the extension and click the Edit icon.
10. Select the Key tab.
11. Right click on the key to be programmed and select Pre-registered Call
Forward from the resulting list.
12. Click on the desired Call forward type.
13. Fill in the Forward To destination, Move the desired DN to the Registered DN
box, and assign the No Answer Time.
14. When all fields are assigned as desired, click on OK.
15. Click on the Save icon to save settings
To set Call Forward Busy/No Answer from a station:
Station extension button + #6041 + XXXX# + 10
1. Press your extension button
TOSHIBA
Forward unanswered calls after a set number
– Cancels the currently set Call Forward feature

"Example: Call Forward to extension"

– A four-digit Call Forward pass code may
IPedge
Feature Operations
Forward all calls when
on Page -41.
– Call Forward
#
. The system will allow
41