Preface - Fujitsu M10 Series Installation Planning Manual

1
This manual describes the requirements and concepts of installation and facility
planning that pertain to the setup of Fujitsu M10/SPARC Servers, SPARC Enterprise
and PRIMEQUEST. Installation and facility planning requires full review with
Fujitsu representatives in charge according to the instructions presented herein.
This manual is intended for site planners preparing for the server system installation.
Use this manual to review server system installation plans or to run and administer the
server system. The reader is assumed to have some knowledge or experience in the
server system installation planning.
SPARC Servers include the SPARC M10 and SPARC T7/M7/T5.
Contents and Organization of This Manual
This manual consists of 8 chapters, one appendix, one acronyms and abbreviations
section, and one index as below:
The manual contains general information and precautions required for the server
system installation plans. For information about specific Fujitsu M10/SPARC
Servers, SPARC Enterprise models and PRIMEQUEST models, refer to the
respective Installation Planning Manual.
CHAPTER 1 Installation Planning Overview
This chapter describes general requirements for the server system installation
planning and for the facilities used to house the server systems.
CHAPTER 2 Installation Sites
This chapter describes the recommended sites and structures and the buildings in
which the server systems can be installed, and the structures of the computer rooms.
CHAPTER 3 Equipment Layout
This chapter describes the procedures and precautions to take in laying out the server
system equipment.
CHAPTER 4 Air Conditioning
This chapter describes the available computer room air conditioning methods, along
with their features, conditions of air conditioning, and precautions.
C120-H007-08EN

Preface

i