Setup
Loose Parts
Use the chart below to verify that all parts have been shipped.
Step
1
Speed selector lever
2
No parts required
3
No parts required
Step
1
Installing the Speed Selector
Lever
Parts needed for this step:
1
Speed selector lever
Procedure
1. Remove and discard the nut securing the bolt
and washer to the speed selector lever.
2. Secure the lever to the speed selector valve
using the bolt and washer as illustrated in
Figure 3.
Note: The lever should be installed with the
bend toward the operator.
Description
1. Speed selector lever
2. Speed selector valve
11
Qty.
1
Install the speed selector lever.
–
Charge and connect the battery.
–
Check the uid levels.
Figure 3
Use
1
2
G003791